Cat Faucet Controller Component List

• 2 - 10K ohm Pot
• 2 - 33K ohm
• 1 - LED
• 1 - 5V Jack, center hot
• 1 - 20 pin Socket
• 1 - ATtiny26L (pre-programmed)
• 3 - 3 Pin header (servo, cat sensor, people sensor)
• 2 - 2 Pin header (setup)
• 1 - 120VAC/5V wallwart power-supply
• 2 - 0.68uF cap
• 1 - 10uf Cap

Cat Faucet Automatic Valve Component List

• 1 - Saddle Valve, For 3/8" to 1" O.D. tube with 1/4" O.D. compression outlet
• 2 - 3/8"-1/4" compression adapter
• 1 - Ball Valve, 3/8" 3/8" Straight
• 1 - R/C Servo
• 1 - pre-formed push rod wire
• 6' - 1/4" high pressure tubing
• 6' - 1/4" low pressure tubing
• 1 - Pre-assembled aluminum servo/valve mount
• x - tie-wraps (5-Kit) / (2-assembled)
• 1 - enclosure box (assembled only)

Cat Faucet Sensor

• 1 - Sharp Distance sensor
• 1 - Gray plastic box, 1.97 in L x 1.38 in W x 0.79 in H (cut for Sharp Sensor)
• 6' - 4 conductor cable (only use Red/Black/Green)
• 1 - 6 pin IDC connector (kit) / soldered on 3 pin connector (assembled)